TOPCLIMBER.

How many times have you had to get up the mast and you have not found anyone to help you?

With the new "TOPCLIMBER" you will never have such a problem. Infinite Sea offers you TOPCLIMBER,  the first boatswain's chair that lets you aloft without anybody else's help. A user friendly system that needs to use just one fixed halyard to confortably and seemlessly take you to the top, no matter how fit or young you are. Top Climber consists of two parts: an upper part with seat and backrest, and the lower part with two footrests.
Both parts share two mechanisms that do the work. The procedure is very easy, just alternate sitting on the TOPCLIMBER seat, and standing up on the footrests.The new TOPCLIMBER combines technology and design beating by 20% the most sophisticated mountain gears officially approved. In the USA, the launch of the product was an unprecedented success for such a gear - more than 1.000 units sold during the first month. This is because TOPCLIMBER provides you independence at last. Moreover, its is easy to use, it is confortable, easy to stow away and it offers great security.

PLACE YOUR ORDER HERE

SAFE USE INSTRUCTIONS: 1.- Before you use TOPCLIMBER: - Read the instructions carefully. - Get familiar with the TOPCLIMBER parts. The seat unit is part A. The support belt is part B. Each unit has a clamp. The lever with the fetter should always be on top. It has a carrying bag that can be used to transport tools up the mast. - You will need a static rope long enough to reach the mast. NB: Only use good quality 10 mm (7/16) ropes as static rope. Always inspecr the TOPCLIMBER gear and the rope before using them. Check that the fetters, the rivets and the seams are in good use condition. NEVER use it bearfoot. 2.- Getting TOPCLIMBER ready: - Make a strong knot of the static rope to the halyard and lift it to the top of the mast. - Introduce the other side of the rope to clamp A with the lever facing up. - Introduce the clamp B in the same way. - Let the rope pass through clamp A so as to have enough rope to tie it and secure it. - Do the same with clamp B. - Pick up the rest of the rope and secure it firmly to the mast base. - Tie the tool bag to any of the sides of the seat. 3.- To climb up the mast: - To get up the TOPCLIMBER, open clamp A and place it in a confort position so as to sit. - Put your legs within the belts of the seat, and sit down. - Slide clamp B until its right below clamp A. - Place your feet in the belts of the support unit. - Leaning on the belts, get up, slide clamp A until it is at your chest height, close it, and sit down again. - While you are seating, slide clamp B until it is right below clamp A again, and close it. - Repeat this procedure until you have reached the desired height. 4.- To descend: - While you are seating, open and slide clamp B down to your knees height. Close the clamp - Stand up, open and slide clamp A until it is placed right above clamp B. Close it and sit down. - Repeat the process until you have descended to the boats deck safely. - Disassemble TOPCLIMBER, inspect it, clean it if it is necessary and stow it away.